FREE SHIPPING ON ORDERS OVER $250 CAD OR $190 USD EXCEPT FOR PRE-ORDERS
0

How to Clean LED Worklights

Cleaning and maintaining your Unilite product is important as it keeps it in peak working condition. With all of them coming in various shapes and sizes, there are some general cleaning tips that can be applied across the board.

Cleaning outside of your Unilite not only makes it look great but keeps it working efficiently.  To clean this part of your Unilite you will need the following equipment:

CLEANING THE OUTSIDE OF YOUR UNILITE LIGHT

  • Alcohol cleaning pads
  • Cotton wool buds
  • Firm bristled brush
  • Tissue/Kitchen roll

Start with wiping the outside of the unit with the alcohol pad. After this has been applied across the whole product, you can start to use your firm bristled brush to thoroughly clean and remove any outstanding dirt or grime. After this, wipe it dry with an anti-static cloth preferably or kitchen roll if that’s not available. For the lens it is best to avoid using the hard bristle brush as this may cause scratches. For this it is best to wipe it clean with an anti-static cloth or kitchen roll.

CLEANING THE INSIDE OF YOUR UNILITE LIGHT

To clean the inside of your Unilite you will need the following:

  • Alcohol cleaning pads, or solution
  • Cotton wool buds
  • Soft bristled brush
  • Tissue/Kitchen roll

When it comes to cleaning the inside of the unit you need to take greater care (if of course it can be opened). This is because they contain important battery contacts which must be kept safe.

Firstly, remove any batteries from the unit. Wipe the inside with alcohol cleaning solution or pads. You can then give a it a soft scrub with a cotton wool bud. When the clean is complete, leave any components and parts to dry for around 2 hours. After this, put the unit back together and you should be good to go. Complete this process every 6-12 months depending on how often you use it and you’ll get many happy years of use out of it.